Tips for Maintaining Your Battery-Powered Lawn Tools

Keeping up with your lawn care is a lot of work. From mowing and weeding to edging and trimming, it can take hours to maintain a beautiful outdoor space. Thankfully, there are many battery-powered tools available that can make the job a lot easier. But how do you keep those tools running in tip-top shape? Read on for some of our tips for maintaining your lawn tools so they stay in tip-top condition and give you years of trusty service.

Charge The Batteries Regularly

The most important step in keeping your battery-powered lawn tools in good condition is to charge them regularly. Most batteries are designed to last at least a few years if they’re properly maintained and recharged when needed. To extend the life of your battery, be sure to charge it every few weeks, even if you haven't used it recently. This will ensure the battery stays at its peak performance level and will be ready whenever you need it.

Keep Your Batteries Clean

A further key step in the upkeep of your battery-powered lawn tools is to keep the batteries clean. Dirt and dust can build up on the terminals of the batteries and cause them to corrode or short-circuit over time. Wipe down the terminals every time you use your tool with a damp cloth or paper towel, being careful not to get any liquid inside the housing of the battery itself. This will help keep them clean and free from corrosion or other damage caused by dirt buildup.

Store Your Batteries Safely

It’s also important to store your batteries safely when they’re not in use. Batteries should be stored in a cool, dry place away from direct sunlight and any heat sources like radiators or hot water pipes. It’s also best practice to store them at room temperature (15–20°C) where possible, as this helps prolong their life by reducing wear and tear on the internal components of the battery cell itself.

Service The Tool and Replace Parts as Necessary

If something isn’t working quite right with one of your tools (especially if it’s not responding to a full charge), it might be time for a service or to replace some parts. This can mean anything from blades on a mower or trimmer head on an edger; whatever it may be, check manufacturer instructions for replacement guidelines and then contact us for a service or to purchase replacement parts accordingly. It’s also a good idea to have spare parts on hand if something goes wrong mid-mow or trim job; having extras means less downtime on the job.

Clean Your Tools Regularly

You should clean all of your tools regularly—not just those powered by batteries. Cleaning blades on mowers, edgers and trimmers will help maintain their sharpness and prevent rust buildup over time. A simple wipe-down will do the trick here; make sure that all dirt or debris is removed before putting any tool away for storage. Following the above steps will help keep your battery-powered lawn tools running smoothly for years to come! Make sure you charge your batteries regularly, clean them often, and store them safely when not in use - doing these simple things will ensure your equipment is ready to go when you need it most! Taking care of your equipment now will save time (and money!) down the line, and of course, for any advice on battery-powered yard equipment, give us a call; we're always happy to help!

The Growing Popularity of Battery Operated Lawn Care Tools

If you're an Australian homeowner, you know having a beautiful garden and lawn requires effort. But maintaining it can be time-consuming and expensive. Fortunately, the green revolution of battery-operated lawn care tools is here to help make the job easier. Let’s take a look at just a few of the types of tools available, why they're becoming increasingly popular, how to choose the right one for your lawn care needs and the many benefits they provide.

Mowers

Going green has never been easier with battery-powered lawnmowers. They offer the power of traditional gas-guzzling mowers without all of the harmful emissions and noise pollution, making them perfect for homeowners seeking a cleaner, healthier outdoor environment. Additionally, battery-powered lawn mowers feature whisper-quiet operation, allowing you to conveniently mow your lawn without disturbing your neighbours. And best of all, they require minimal maintenance and expense - no fuel or engine oil refills are required! With their superior performance and eco-friendly design, it's no wonder battery-powered mowers are quickly becoming the choice of many homeowners.

Chainsaws

Battery-operated chainsaws are an excellent choice for those who don't want to deal with the mess of fuel while still getting powerful performance out of a saw. Not only do they offer all the convenience of traditional cordless power tools, but they also provide up to 10x more torque than a petrol engine, allowing you to cut through even toughest braches with ease. Furthermore, battery-operated chainsaws are incredibly quiet compared to petrol models, making them ideal for those wanting to work in the evening or during the early hours. All-in-all, for anyone looking for a clean and convenient cutting experience that is still highly effective and powerful, battery-operated chainsaws have it all.

Grass Trimmers

Every lawn enthusiast knows keeping a yard looking neat and tidy takes a lot of work. Fortunately, battery-operated grass trimmers (also known as whipper snippers) make the job easier. They are simple to use yet powerful enough for most household needs. Battery-operated grass trimmers reduce the noise pollution of regular fuel-powered trimmers and can be used virtually anywhere - from your front lawn to small flower beds. They provide the perfect balance between budget and convenience and so if you're looking for a reliable and efficient way to keep your lawn looking its best without breaking the bank or ruining the environment, then they are a great choice.

Choosing the right tool for your needs

When it comes to choosing the right battery-operated tools for your lawn care needs, there are several factors to consider. Depending on how big your yard is, you’ll want to make sure that you get tools with enough power and battery life to last through the job. Additionally, if you have particularly difficult terrain, you might want to find tools with variable speed settings so that you can work more efficiently and safely in different areas of your yard. The easiest thing to do is get in touch with one of our helpful team members who'd be happy to help!

How to Safely Clear Fallen Tree Branches After a Summer Storm

After a big, wild summer storm, there's a reasonable chance you might be left with large branches or even whole trees down in your yard. This can be a daunting task to tackle, but with the right tools and know-how, it's definitely doable! Here are some tips on how to safely clear fallen tree branches to help prevent any further damage to your property and also help keep your family and pets safe from harm.

Assess the Situation

Before you start clearing away any branches, it's important to take a moment to assess the situation. If there are downed power lines in the area, do not attempt to remove any branches yourself. Call your local power company and wait for them to arrive before proceeding. If there are no downed power lines, you can begin safely removing the branches yourself but always remain alert and aware in case the situation changes.

Remove Small Branches by Hand

For small branches, the best way to remove them is by hand. If the branch is too big to lift, you can use a saw or axe to cut it into smaller pieces that can be lifted and removed easily. Be sure to wear gloves and long sleeves when handling any broken branches, as they may be sharp and it's easy for scratches to become infected so it's best avoiding them.

Use a Chainsaw for Large Branches

If you have a chainsaw, this is the best tool for removing large branches. Start by cutting through the branch at its base. Then, work your way up the branch until it has been completely severed. Use caution when operating your chainsaw, and be sure to read the manufacturer's instructions carefully before using it.

Cut Up and Remove the Trunk of a Fallen Tree

If you come across a large tree that has fallen, it will be important to remove the trunk, as well. This can be done using a chainsaw and requires cutting the tree in sections until it's small enough to lift. If you're removing a large tree on your own, consider calling in some help or renting a heavy-duty stump grinder to make the job easier.Once all of the branches have been removed, take a moment to clean up any debris or sawdust that may remain. Then, you can begin digging out the stump or call in someone to do this for you.Having a strong shredder on hand can also be helpful in removing fallen tree branches. Remember to take all necessary safety precautions when working with heavy tools and equipment, and always exercise caution when clearing out debris after a storm.By following these tips, you'll be able to safely clear away fallen branches and other debris from your yard after a summer storm, making your property safe and secure once again.

A Beginner’s Guide to Understanding and Using a Chainsaw

A chainsaw can be a powerful tool when used correctly, but it can also be dangerous if you don't know how to use it properly.In this guide, we'll outline the basics of chainsaw use and safety. We'll cover everything from choosing the right chainsaw for the job to cutting safely and efficiently. So if you're a homeowner who needs to do some tree trimming, read on, and we'll help you understand chainsaws like a pro.

Choosing the right chainsaw

At the Mower Place, we know choosing the right chainsaw can be a daunting task. There are lots of factors to consider, from the size of the saw to the type of wood you'll be cutting. But don't worry - we're here to help. Here are a few things we advise you to keep in mind when chainsaw shopping:- The size of the saw: Think about the thickness of the branches you'll be cutting. A small saw might be fine for thinner branches, but you'll need a larger saw for thicker ones.- The type of wood: Some woods are harder than others, so you'll need a saw that's up for the challenge. If you're not sure what kind of wood you'll be cutting, it's best to err on the side of caution and choose a more powerful saw.- Your budget: Chainsaws can range in price from around a couple of hundred dollars to thousands. It's important to set a budget before you start shopping, so you don't get overwhelmed by all of the options.

How to use a chainsaw

Operating a chainsaw may seem daunting, but with a little practice, it can be easy to master.The most important thing to remember is always to operate it with caution and care. Before starting the chainsaw, ensure the area around you is clear of obstacles and that you have a firm grip on the saw. Once you have started the chainsaw, allow the blade to reach full speed before beginning to cut. When cutting, keep it steady and use long, even strokes. Be careful not to apply too much pressure, as this can cause the blade to bind. If you need to stop cutting for any reason, release the trigger and allow the blade to come to a complete stop before setting down the chainsaw.

Chainsaw safety tips

Here are a few safety tips to keep front of mind when using your chainsaw:Start by reading the manual. While this may seem like a no-brainer, it's astounding how many people neglect to familiarise themselves with their chainsaws before using them. Pay special attention to the safety precautions and ensure you understand how the saw works.Choose the right chainsaw for the job. There are many different types of chainsaws available, each for different needs, so it's important to choose one that is best suited for the task at hand. If you're not sure, come see us for guidance.Take proper and adequate precautions. Always wear protective clothing and equipment when using a chainsaw, and be aware of your surroundings. Make sure there are no other people or animals nearby and be careful to avoid hazards such as power lines, etc.

Chainsaw maintenance

Chainsaws require regular maintenance to keep them running smoothly and safely. After each use, be sure to clean the chainsaw and apply oil to the chain. It's also important to sharpen the chain regularly, and we recommend doing this every few uses. If you're not comfortable sharpening the chain yourself, bring it in for us to do it for you.We hope this blog post has helped teach you about chainsaw use and safety. Remember always to be careful when using a chainsaw, and if you ever have any questions, feel free to ask one of our experts here at the Mower Place.

Get your firewood cut before winter sets in!

It is best to create a firewood stockpile in Autumn when you can get busy and prepare for the cold weather. Cutting your own firewood with a chainsaw is one of the most efficient ways to do this. Read our latest blog post for tips on how to most effectively use your chainsaw to cut firewood.

Get your firewood cut before winter sets in!

The days are getting shorter and the temperature is dropping, which means one thing: winter is coming! If you want to be prepared for the cold weather, you need to have a stockpile of firewood organised and Autumn is a good time to get prepared. One of the most efficient ways to get firewood is by cutting it yourself with a chainsaw. In this blog post, we'll give you the rundown on using your chainsaw to cut firewood.

Chainsaw safety

Anyone who has ever operated a chainsaw knows that it can be extremely dangerous. The blades are razor-sharp, and the chain moves at lightning speed, making it all too easy to cause serious injury. That is why it is so important to follow basic safety guidelines when using a chainsaw. First and foremost, always wear proper safety gear, including gloves, eye protection, and hearing protection. In addition, keep a firm grip on the saw at all times, and be careful not to put your hands or feet in the path of the blade. If possible, work with someone else when using a chainsaw to ensure that someone is there in case of an accident. Finally, always shut off the saw and unplug it before cleaning or making any adjustments. By following these simple safety tips, you can help prevent accidents and injuries when using a chainsaw to gather your winter firewood.

Chainsaw maintenance

A chainsaw is a powerful tool that can make quick work of even the toughest tree. However, a chainsaw is only as effective as its operator. In order to keep your chainsaw in top condition, it is important to perform regular maintenance. This includes sharpening the chain, cleaning the guide bar, and oiling the saw. Additionally, it is important to inspect the saw before each use, looking for any signs of wear or damage. By taking proper care of your chainsaw, you can ensure that it will be ready when you need it.

Chainsaw cutting techniques

Chainsaw cutting is a learned skill that, when mastered, can make felling trees, trimming branches and gathering firewood much easier. The first thing to know is the proper grip. For most people, holding the chainsaw with both hands is the best way to get started. The next thing to learn is the right angle to cut at. When cutting through a trunk, it's important to keep the blade at a low angle so that you don't get stuck. Finally, it's important to use a sawing motion rather than a hacking one. This will help you avoid damaging the chain and kickback. With a little practice, anyone can learn how to cut like a pro with their chainsaw.

Chainsaw firewood cutting tips and tricks

Cutting firewood with a chainsaw can be a challenging task, but there are a few tips and tricks that can make the job easier. For example, it's important to choose the right saw for the job. A smaller saw will be easier to handle, but it may not have the power necessary to cut through larger pieces of wood. In addition, it's important to sharpen the chain regularly. A dull chain will not only make the job more difficult, but it can also be dangerous. Rushing through the process can lead to accidents, so it's important to work slowly and carefully and take your time. And when cutting firewood, it's recommended to always start with smaller logs and work your way up to larger ones. Then finally, when you're finished for the day, carefully clean and store your saw to prevent accidents.To learn more about chainsaws and to explore the models we recommend, pop in to visit one of The Mower Place stores or call us on 1800 558 400 for friendly and expert advice.

7 Tips for Making Sure You’re Using Your Chainsaw Safely

The versatility of chainsaws makes them a great addition to the garden shed. However, you should always use them carefully. Here are a few things you can do to make sure you're using your chainsaw in the safest way.

7 Tips for Making Sure You're Using Your Chainsaw Safely

Chainsaws are powerful tools that can be used for a variety of jobs and this makes them a great asset to have in the garden shed. But of course, it's important to use them safely. There are a few things you can do to make sure you're using your chainsaw in the safest way possible.

Use quality ear and eye protection

Using a chainsaw can be dangerous if you're not careful and safety-conscious. It's really important to take some simple precautions to stay safe when doing any yard work with a chainsaw. One of the most important things you can do is to use quality ear protection. The loud noise of the saw can damage your hearing if you're not careful, so it's important to make sure you have earplugs or earmuffs that will help to deflect the noise. In addition, be sure to wear eye protection to help guard against flying debris.

Keep your chainsaw in good condition by sharpening the blade regularly

A dull blade can cause the saw to bind, kickback, or run riot, all of which can be dangerous. In addition, a sharp blade cuts more cleanly and with less effort, making it easier on both you and your saw. You should also check your chainsaw's chain tension regularly; a loose chain can easily come off the bar, leading to serious injury. By taking a few simple steps to maintain your chainsaw, you can help reduce the risk of accidents and injuries.

Don't overreach when using your chainsaw, always take care with your position

Always cut from a standing position or kneel on one knee, rather than reaching out to make a cut. By keeping your body in alignment, you'll have more control over the saw and be less likely to cause an accident.

Make sure you're holding the chainsaw correctly, with both hands on the handle

One of the most important safety tips when using a chainsaw is to make sure you're holding it correctly. The saw should always be gripped with both hands, with one hand on the main handle and the other on the rear handle. The chainsaw should also be held close to your body, with your arms relatively straight. This will give you the most control over the saw and help to prevent accidents. Remember to keep a firm grip at all times, even when the saw is not in use. If you're not holding the chainsaw correctly, you could easily lose control of it, which could lead to serious injury.

Use your dominant hand to hold the saw and your other hand to support it from underneath

Always use your dominant hand to hold the chainsaw and your other hand to support it from underneath. This will help you maintain better control of the saw and prevent it from slipping out of your hands. It's also important to make sure that you're using the right size saw for the job. A saw that's too small won't be able to handle the workload, while a saw that's too large will be more difficult to control. Choose a chainsaw that's comfortable for you to hold and that you can easily manoeuver.

Be aware of where the kickback zone is and keep your fingers away from it

Kickback is one of the most dangerous risks associated with using a chainsaw, and it can happen in a split second. That's why it's important to be aware of where the kickback zone is on your saw and to keep your fingers well away from it. The kickback zone is the area of the saw blade that extends beyond the guide bar. If the blade becomes lodged in a piece of wood, the saw can snap back towards you with tremendous force. To avoid being injured by kickback, always keep your fingers behind the line of the guide bar, and never place them in the kickback zone.

Don't try to cut through knots or dirty wood as this can cause the chain to come off

Trying to cut through knots or dirty wood with your chainsaw can be dangerous and cause the chain to come off. If you're not careful, this can lead to serious injury. Instead of taking this risk, it's best to avoid knots and dirty wood altogether. If you must cut through them, take extra care to make sure that the saw is in good working order and that you're using the proper technique.Finally, always be sure to read the instruction manual that came with your chainsaw before using it. This will help you understand how to use it properly and safely. By following these simple tips, you can lower the risk of accidents and injuries when using your chainsaw. For any advice on chainsaws whether it be selecting the right model for your needs or just booking yours in for a service call us at the Mower Place on 1800 558 400 and we'll be happy to help you out.

8 Top Tips For Trimming Trees Safely

Tips Trimming Trees

8 Top Tips For Trimming Trees Safely

When trimming trees, there are a few things to take into account. The first is the fact that you'll need to take care not to damage other parts of the tree, including the trunk, branches, and roots. Tree trimming should only be undertaken with the right equipment and while always taking great care to follow safety measures.

Always use the right tool for the job.

Using a chainsaw to cut off the end of a small branch is dangerous, and it does no good. Always use the tool that's appropriate for the job at hand. Anvil loppers can be used on branches up to 1-1/2 inches in diameter, hand pruners handle spindly smaller branches, and pole saws are best for larger branches. Heavier duty chainsaws should be used only on the trunk.

Be especially careful when trimming trees near power lines.

Before you begin trimming any tree, always look up to see where the power lines are. Make sure you have plenty of space to work in and don't attempt to cut anything within 3 metres of power or telephone lines.

Never cut with a dull blade.

A sharp tool is far safer than a dull one, and it does the job faster too. A good and safe practise is to cut with the grain of the wood whenever possible; cutting against the grain can cause problems with both tree limbs and your tools.

Never trim a tree in poor weather conditions.

If you're cutting a tree that's already dead or dying, choose a time when weather conditions are calm. The safest time is early in the morning. Don't attempt to cut anything if it's too windy, because branches can fly back at you with deadly force after being cut.

Use caution when trimming trees near houses or other structures.

You don't want to cut off any branches that extend too close to windows or power lines, so if you can, try to do your cutting at a distance away from buildings, or cordon off the areas where you're cutting with protective barriers and trim away from the house, paying extra attention to where the debris is likely to fall.

Beware of falling branches.

A fallen branch can become a projectile, so be sure to trim your trees at the proper height. Protect yourself from falling debris by wearing heavy-duty gloves, long sleeves, long pants, socks with closed shoes or boots, and goggles if possible to avoid any mishaps.

Have a plan for what you're going to do with the trimmed branches.

You can either compost the trimmings or take them to the dump. If you do decide to place them in your compost pile, clearly dedicate an area with sufficient space around it so that no one is injured by the branches when they're either gathered there or removed.

Need to trim a tree that's very tall and imposing? Find a professional to do the job for you.

While some people are confident in having a go at trimming a large tree, if you're not entirely comfortable with heights or if the tree is very tall and imposing, consider bringing in a professional to do the cutting.If you need advice on how to trim trees safely or would like some information and a great price on the best power tool for the job, our friendly and expert team are always on hand to assist.Contact us today on 1800 558 400 and we'll help make your yard work easier!Share on facebook Facebook Share on twitter Twitter Share on linkedin LinkedIn

How Do You Sharpen A Dull Chainsaw Chain?

Chainsaw chain can become dull after frequent use. A dull chainsaw is dangerous to use. This is because the equipment will become more prone to kickback. In this article, we’ll share with you the dos and don’ts of sharpening a chainsaw and several tips on how to keep your equipment in tip-top shape.

How Do You Sharpen A Dull Chainsaw Chain? | The Mower Place

Whether you’re a timber worker or a homeowner interested in cutting firewood from fallen trees or overgrown shrubbery, know that it is vital to maintain your chainsaw. With frequent use, the dozens of cutter teeth would become dull. Unsharpened chainsaws have reduced effectiveness and performance. This would require users to exert more physical effort. A dull chainsaw chain also makes the equipment dangerous to use. This is because the saw will become more prone to kickback.

Recognising A Dull Chainsaw

There are several signs you need to take note of while working with your chainsaw. If you notice any of the signs, it may mean it’s time to sharpen or replace the saw chain. Take a look at our checklist below.

The chainsaw chain does not pull itself into the wood.
You have to apply pressure to force it through the wood.
The chainsaw produces fine sawdust when cross-cutting.
The saw produces smoke
The chainsaw does not make even cuts.

Dos and Don’ts

Regular sharpening using filing will keep your chainsaw running in tip-top shape. However, there are a couple of things that you should remember before attempting the task. Do: Familiarise yourself with the saw chainYour chainsaw comes with an owner’s manual where manufacturers typically include a detailed diagram of the parts of your saw chain. In the manual, you’ll see many cutters, which are the focus of the sharpening process. Don’t: Wait for signs of fine sawdust.Sharpening your chainsaw every second or third time you refill the fuel would reduce the chances of having a dull saw chain. Do: Use the correct file diameterGenerally, round files are used to sharpen chainsaws. The standard diameter ranges between 4mm to 6mm. Experts recommend checking your owner’s manual to find the optimal file diameter. Don’t: Push the fileWhen using a round file, you should always sharpen away from yourself. Do not pull the file before pushing it. Instead, lift the file up to return to the starting position and push it again. Use the same number of file strokes and the same pressure to file each cutter.

Sharpening Your Chainsaw

Here are some of the steps that every expert follows to sharpen a chainsaw chain:

Wear protective gloves.
Secure the guide bar in a vice. This keeps the saw from moving and injuring you while you are trying to sharpen the saw chain. You can use a workbench or a stump vice to do this.
If you are working with a battery-powered or a corded chainsaw, make sure that the battery or the cord is not plugged in before sharpening. This would prevent the equipment from accidentally starting while you’re working.
Release the chain brake to allow the chain to move freely.
Use a soft brush to remove any dust off the chain.
Mark your saw chain’s first tooth with a black marker.

If you are planning on sharpening your chainsaw, we have a wide range of files available here at The Mower Place. Do you need more advice from experts? Call us at 1800-558-400 or drop us a message on our Facebook page.

What’s The Difference Between Electric And Gas-Powered Concrete Saws?

Concrete saws are known for their ability to cut through tough surfaces, including concrete, tiles, masonry bricks, and soft stone. These powerful tools are built to make precise cuts on solid materials without users having to spend a hefty amount of cash. Two of the most popular options are electric and gas-powered concrete saws.

What's The Difference Between Electric And Gas-Powered Concrete Saw?

A cut-off saw, commonly referred to as a concrete saw, is a powerful tool built to cut through tough surfaces. Concrete saws can cut concrete, tiles, bricks, and masonry. Most cut-off saws feature diamond saw blades and abrasive wheels that allow precise cuts on solid materials. Concrete saws eliminate the need to hire labour on a project. People who want to get immediate results without spending a hefty amount of cash would benefit from owning a concrete cutter. There are many types of concrete saws. However, two of the most popular options remain to be electric saws and gas-powered saws. Here’s a brief rundown of the difference between the two types of concrete saws.

Electric Concrete Saws

Lightweight. Electric saws are lighter than gas-powered saws because there is no additional chamber for the fuel.
Storage. Electric saws are easier to store. This outdoor power equipment can be stored virtually anywhere without causing fire hazards.
Quiet operation. Electric cut-off saws are suitable for noise-sensitive areas. This may include schools, churches, and universities.
Maintenance. This outdoor power equipment requires less ongoing maintenance, making it a fuss-free option.
Indoor use. Electric concrete saws do not emit hazardous fumes. This makes it the preferred equipment to use in enclosed spaces. It can also fit in narrow areas where its larger counterparts could not.
Variety. Electric saws come in corded and cordless varieties. Cordless saws are powered by batteries. Some electric saws come with both corded and cordless versions. This means you can run the saw on electricity if the battery drains.
Power. Electric saws are designed for lighter tasks. It may take longer to complete a heavy-duty job.

Gas-Powered Concrete Saws

Safety. Gas-powered saws do not have long cords. This means there would be a reduced risk of the user tripping over the cord while using the tool.
Flexibility. Gas-powered saws don’t operate using electrical connections. This means it’s suitable for dry and wet cutting.
Dust containment. Some gas-powered saws come with a vacuum and a dust-containment system to make dry cutting safer and healthier for users. However, experts still recommend wearing safety gear to prevent dust inhalation.
Durability. Gas-powered saws are durable. It can also tolerate rough handling.
Power. Gas-powered saws are built to be robust. This means it can also handle heavy-duty tasks.

Best Concrete Saw

The STIHL GS 461 Rock Boss is a gas-powered concrete saw made for cutting deep into concrete and other tough materials. This concrete cutter features a 40 cm or 16-inch guide bar that cuts up to 15.7 inches deep into concrete, reinforced concrete, masonry bricks, and soft stone. The GS 461 Pro Concrete Saw also features an anti-vibration system that minimises the vibration level of the power equipment. This means the STIHL operator would less likely be fatigued. Do you want your own STIHL GS 461 Rock Boss Concrete Saw? Get it delivered to your doorstep for free if you live anywhere within 30 kilometres of a Mower Place store. You can also pick up the concrete saw from any of Mower Place’s three service centres.

Are you looking for advice from concrete saw experts? Contact the Mower Place today by clicking here.

5 Advantages of Using A Stihl Chainsaw (And How to Use It This Autumn)

In this article, we cover everything you need to know about STIHL equipment and why it’s the perfect brand for your Autumn needs.

5 Advantages of Using A Stihl Chainsaws (And How to Use It This Autumn)

Picking out the best brand of chainsaw is like figuring out which brand of car drives the fastest. Among loggers, there are many top-of-the-line chainsaw names that provide quality equipment and service.While they all have many high-quality models in stock, picking out which one is better is sometimes a personal choice. However, we are here to give you some insight to help you decide which type of chainsaw would benefit you most.

Try Out Chainsaw Models

The best way to know if a chainsaw model is suited for you is by using it first hand. This is best done by renting models from companies that offer chainsaws for rent. Comparing models from each brand with similar size and power allows you to determine which one you prefer without the commitment of buying. Make sure to ask how much time each model you plan to rent has been clocked. Trying out two similar chainsaw models with a large age gap will give you inconsistent results. When renting a chainsaw, try out all of its features and benefits to see what is useful for you.Talk with the rental company about the maintenance requirements for each chainsaw model you borrow. You could even ask them which brand they prefer to use and which ones are difficult to handle. Taking opinions from fellow arborists or loggers is also an excellent source of insight.

Advantages of Stihl Chainsaws

Founded in 1926 in Stuttgart, Germany, Stihl has a long history of manufacturing top-quality chainsaws. Amazing quality and durability are only some of the benefits of using Stihl equipment.

Popular for having more low-end torque, giving users an easier time for tough cutting operations.
Stihl’s chainsaws have a smaller fuel tank than its competitors, making each model lighter and easier for handling.
Commonly much cheaper than Husqvarna chainsaws.
Popular for having easier routine maintenance requirements.
Homeowners favour the Stihl brand over its competitors for ease of use.

Autumn Garden Guide With Stihl

Stihl is a popular choice for arborists and gardening professionals looking for the best equipment available. With autumn here, many are planning changes to their landscapes and gardens ready for the winter months. Here is a short guide to preparing your garden with the help of Stihl.

Basics

If you have a lot of grain timber you need to cut, cleaving axes are the perfect tool to use. And if the timber has more knots in it, Stihl has cleaving hammers with wider heads perfectly suited for your work.To make sure you cut the timber properly, keep the tool in a straight line when chopping. You should have a suitable chopping block and keep it about 60cm from the ground. This avoids damage to the tool or any back injuries.When chopping kindling, hatchets are the best choice because of their relatively small size. While working, try to maintain a relaxed swing and hit the log directly. Using a tool minimises the amount of power you use by taking advantage of its own weight.

Chainsaws

The most important thing to remember in using a chainsaw is safety. First-time users should thoroughly study the safety manual and inspect the equipment’s safety features. Often, users disregard checking the sharpness of the chain. A dull chain will make your work much more difficult and could damage a chainsaw.If a chainsaw’s chain becomes dull, you could use a chain file kit to sharpen the blades. Advancements in manufacturing resulted in chainsaws with lighter and ergonomically friendly kickback chains and bars.Before starting your work, make sure the piece of wood you plan to chop will not move during the process. You should also maintain good footing and remove any object that could make you slip.

Safety

Always prioritise your safety when handling power tools and equipment. Wearing personal protective equipment (PPE) also minimises the risk you face when using chainsaws and other equipment. A suitable set of PPE is comfortable and lightweight.Stihl has an array of PPE options available that will guarantee your safety while letting you work efficiently. There are ear and eye protection that will safeguard sensitive parts and boots and gloves to avoid injuries.

Mowing

Cleaning up leaves off your lawn can sometimes be an arduous task. Using a Stihl mower makes this type of work much easier and more manageable. Run a mower through them and collect them inside a box for easy transfer into the compost heap.Moss is a common problem when tidying up a lawn. You can get rid of them by using a moss killer and waiting for them to blacken. A moss scarifier helps you completely rid your garden of moss easily and efficiently.Stihl’s Viking lawn mowers are best suited for cutting grass and lifting them at the same time. They are also made to be used on damp lawns, which are more common in autumn. These types of mowers have superb cutting and collecting capabilities in damp environments.You should also make sure that your mower is properly cleaned and maintained. You can refer to the equipment’s owner’s manual for a thorough guide. If you find your mower needs more specialised attention, bring it over to a Stihl dealer to fix it back up.

Eager to get your hands on a STIHL chainsaw? Visit our website at https://mowerplace.com.au/ or get in touch with an outdoor power equipment specialist today!

STIHL Chainsaw: How To Choose The Right Chainsaw For The Job

Are you trimming limbs or felling a tree? Are you looking for a chainsaw that can clean up storm damage?

STIHL Chainsaw: How To Choose The Right Chainsaw For The Job

Home to the first-ever powered chainsaw in 1923, STIHL has proven itself to be a world-leading, quality chainsaw brand you can trust. The flexibility that STIHL’s products provide its customers is endless. Whether you’re working in landscaping or clearing out trees in a forest, woodland area or your own backyard, having a STIHL chainsaw guarantees positive results.STIHL chainsaws are built to last through rigorous use in any environment. The company also provides its customers with continuous and responsive support to address their needs.The German company offers various chainsaws that fit all manner of work, including lightweight, flexible types, to powerful heavy machineries. Here’s how to choose the right STIHL chainsaw for you:

What’s the job size?

STIHL has a wide range of chainsaws designed for jobs of various sizes. Smaller chainsaws are more manoeuvrable than larger ones. Unlike larger chainsaws, smaller models don’t have enough power needed to fell larger trees, especially hardwood. But can handle most backyard maintenance jobs.

What’s the job type?

What are you planning to cut with the chainsaw? Are you trimming limbs or felling a tree? Are you looking for a chainsaw that can clean up storm damage? STIHL offers 30 chainsaw models, as well as different guide bars and cutting chains. An essential guide is that the chainsaw’s guide bar should be at least 2 inches longer than the thickness of the material being cut. If the branch is 5 inches thick, the guide bar or the chainsaw blade should at least be 7 inches long.

How frequent will you need a chainsaw?

If you only need your chainsaw for occasional use, such as limb removal or light felling, STIHL recommends a power tool from its line of homeowner chainsaws. However, people who would require frequent cutting should consider checking out STIHL’s landowner range.

What’s your power source?

Are you looking for a petrol-powered chainsaw? Electric? Battery-powered? STIHL offers chainsaws under all three categories.Battery-powered chainsaws are quiet and typically start with a push of a button. They are the ideal chainsaws for forest workers, arborists, and hobbyists. Petrol-powered chainsaws are modern smart start equipment that packs plenty of power. This type of chainsaw is perfect for pruning heavy foliage and branches. It’s also fantastic for cutting through thick or dense branches. Like gas-powered chainsaws, electric models offer enough power to cut through trees, debris, and more. However, you have to be 100 feet or less away from a power outlet to work through long projects.

How many options do you need?

STIHL is widely considered as a leader in chainsaw technology innovation. The German company also offers value-added options designed to enhance your chainsaw’s performance. Some of these options include Easy2Start, automatic bar and chain oiling, and quick chain adjuster. If you’re thinking about buying a STIHL chainsaw for yourself, hop on to The Mower Place. They offer a wide variety of quality chainsaws from the German maker at an affordable price. Some of the products also come with a 2-year manufacturer’s warranty to help ensure that your investment is safe. The Mower Place delivers your purchases for free if you are located within 30 km of any of their stores. You can also schedule your product for “Pick Up” to collect your item from the nearest service centre. Eager to get your hands on a STIHL chainsaw? Visit The Mower Place’s website or get in touch with an outdoor power equipment specialist today!

Charge The Batteries Regularly

Keep Your Batteries Clean

Store Your Batteries Safely

Service The Tool and Replace Parts as Necessary

Clean Your Tools Regularly

Mowers

Chainsaws

Grass Trimmers

Choosing the right tool for your needs

Assess the Situation

Remove Small Branches by Hand

Use a Chainsaw for Large Branches

Cut Up and Remove the Trunk of a Fallen Tree

Choosing the right chainsaw

How to use a chainsaw

Chainsaw safety tips

Chainsaw maintenance

Get your firewood cut before winter sets in!

Chainsaw safety

Chainsaw maintenance

Chainsaw cutting techniques

Chainsaw firewood cutting tips and tricks

7 Tips for Making Sure You're Using Your Chainsaw Safely

Use quality ear and eye protection

Keep your chainsaw in good condition by sharpening the blade regularly

Don't overreach when using your chainsaw, always take care with your position

Make sure you're holding the chainsaw correctly, with both hands on the handle

Use your dominant hand to hold the saw and your other hand to support it from underneath

Be aware of where the kickback zone is and keep your fingers away from it

Don't try to cut through knots or dirty wood as this can cause the chain to come off

8 Top Tips For Trimming Trees Safely

Always use the right tool for the job.

Be especially careful when trimming trees near power lines.

Never cut with a dull blade.

Never trim a tree in poor weather conditions.

Use caution when trimming trees near houses or other structures.

Beware of falling branches.

Have a plan for what you're going to do with the trimmed branches.

Need to trim a tree that's very tall and imposing? Find a professional to do the job for you.

How Do You Sharpen A Dull Chainsaw Chain? | The Mower Place

Recognising A Dull Chainsaw

Dos and Don’ts

Sharpening Your Chainsaw

What's The Difference Between Electric And Gas-Powered Concrete Saw?

Electric Concrete Saws

Gas-Powered Concrete Saws

Best Concrete Saw

Are you looking for advice from concrete saw experts? Contact the Mower Place today by clicking here.

5 Advantages of Using A Stihl Chainsaws (And How to Use It This Autumn)

Try Out Chainsaw Models

Advantages of Stihl Chainsaws

Autumn Garden Guide With Stihl

Basics

Chainsaws

Safety

Mowing

Eager to get your hands on a STIHL chainsaw? Visit our website at https://mowerplace.com.au/ or get in touch with an outdoor power equipment specialist today!

STIHL Chainsaw: How To Choose The Right Chainsaw For The Job

What’s the job size?

What’s the job type?

How frequent will you need a chainsaw?

What’s your power source?

How many options do you need?

Customer Service

Connect with us